Board index   FAQ   Search  
Register  Login
Board index VRRA Racing Forum Sidecars

Open Front Wheels

Discussions to do with sidecars.

Moderator: Michael Vinten

Open Front Wheels

Postby Steve Humphrey » Mon Jun 06, 2016 10:12 pm

HI,
As a Passenger who sticks my neck out the side of the rig, I wonder why open wheel front wheels are allowed on racing rigs. I absolutely appreciate that we all accept risks when we strap on our helmets, but I think we can reduce a risk here with no real downside.
Most of the rigs have a completely enclosed fairing around their front tire. And for that matter completely enclosed chair tire as well already, so it can be done. It may require some air ducting for cooling and it will add some weight for sure, but it will also increase aerodynamics which will help reduce that as a downside.
I have already been hit by a front tire, luckily it grazed my ass and did not grip my leathers possibly because it was a wet race, so luckily I was not hurt. But i have to say, I would rather be bumped/hit by a fairing than have a tire grab my leathers and quite potentially run me over
In really close racing at very similar speeds say in a braking zone, a bump by a fairing might hardly be an incident, while the same situation with a front tire that grabbed on to my leathers would be a very painfull experience.
To sum this up, I am thinking of proposing this as a rule change at the next AGM, and im looking for feedback here first.

Feel free to comment pro's and con's.
Steve Humphrey
VRRA Member
 
Posts: 162
Joined: Sat Jun 21, 2008 2:55 pm
Location: kitchener

Re: Open Front Wheels

Postby gary holden » Tue Jun 07, 2016 9:24 pm

You're right on all counts.I think the dustbin fairings look ugly but the reasons to have one outnumber any reasons not to.
Where can I get one,as it is way beyond my capability to make one?
Beasley,Armour Bodies,Airtech,carve one out of a big log?
Half-fast Racing 401
gary holden
VRRA Member
 
Posts: 928
Joined: Fri Jan 16, 2004 12:56 pm
Location: Maxville,ont

Re: Open Front Wheels

Postby tintop » Wed Jun 08, 2016 6:23 am

"Anyone can build a race car, the trick is to make it fast." - Harvey Postlethwaite
User avatar
tintop
VRRA Member
 
Posts: 437
Joined: Tue Jun 03, 2008 7:18 pm
Location: Kingston, ON

Re: Open Front Wheels

Postby Percy W » Wed Jun 08, 2016 7:25 pm

Or.....I own the moulds. We can talk.
Percy.
User avatar
Percy W
 
Posts: 599
Joined: Thu Feb 23, 2012 3:49 pm

Re: Open Front Wheels

Postby tintop » Wed Jun 08, 2016 7:43 pm

Percy W wrote:Or.....I own the moulds. We can talk.
Percy.


Are those the ones for the fairings Paul W used that were made by Ron Brooks??
"Anyone can build a race car, the trick is to make it fast." - Harvey Postlethwaite
User avatar
tintop
VRRA Member
 
Posts: 437
Joined: Tue Jun 03, 2008 7:18 pm
Location: Kingston, ON

Re: Open Front Wheels

Postby Percy W » Wed Jun 08, 2016 8:05 pm

Yes.
User avatar
Percy W
 
Posts: 599
Joined: Thu Feb 23, 2012 3:49 pm

Re: Open Front Wheels

Postby Steve Humphrey » Fri Jun 10, 2016 12:50 pm

Gary! Thanks! I appreciate your embracing this even though it will obviously cost you some time and money.
Throw a couple Go-Fast stickers on it, and you will be looking good :)

At this rate I wont even need to cut into beer drinking time at the AGM, if everyone has one, no need for a rule proposal.

Steve
Steve Humphrey
VRRA Member
 
Posts: 162
Joined: Sat Jun 21, 2008 2:55 pm
Location: kitchener


Return to Sidecars

Who is online

Users browsing this forum: No registered users and 3 guests