Board index   FAQ   Search  
Register  Login
Board index VRRA Racing Forum Projects

TZ250W Project

NEW! This section is where we can show off our new bike projects!

Moderator: Michael Vinten

TZ250W Project

Postby Peter Balfour » Sun Mar 06, 2011 8:09 pm

To start this off here is my winter project. This is a Yamaha TZ250W GP bike I aquired last fall. The bike was in decent shape when I got it and had a lot of nice stuff done to it. The body work was in bad shape plus I have found lots of little details that needed to be updated to keep me happy...I'm a tad anal. Anyhow, here are some images of the bike after fitting the new body work I got from Airtech (nice stuff BTW). Next step will be paint!

Image
Image
Image
#2
'71 BSA B50 P1-500
‘84 Yamaha FJ600
User avatar
Peter Balfour
Tech Committee
 
Posts: 1848
Joined: Sat Aug 20, 2005 9:30 am
Location: Mitchell, Ontario

Re: TZ250W Project

Postby mike burke » Wed Mar 09, 2011 9:26 am

Very nice Peter!! Some day I'll have to learn how to race a two stroke, rob a bank and get out on a real GP bike. Welcome to P4.

Mike
Mike

Grampa #227

Enjoy life!
User avatar
mike burke
VRRA Member
 
Posts: 1121
Joined: Mon Mar 10, 2003 7:40 pm
Location: On the road again ....

Re: TZ250W Project

Postby Peter Balfour » Wed Mar 09, 2011 1:29 pm

Thanks Mike. P4 will be an interesting transition and I'm pretty sure I will be firmly getting my a$$ kicked but I'm looking forward to it. I always wanted a real GP bike, it is a different world from a bike you take off the street and try to make a race bike out of. Its very interesting to work on one of these babies, you get to see the solutions the factories come up with for the same problems we face when building a bike. Can't wait for to get her on the track! I'm still racing the P1 BSA though, I have really enjoyed P1500 and have no plans of getting away from playing with the older stuff.

Peter
#2
'71 BSA B50 P1-500
‘84 Yamaha FJ600
User avatar
Peter Balfour
Tech Committee
 
Posts: 1848
Joined: Sat Aug 20, 2005 9:30 am
Location: Mitchell, Ontario

Re: TZ250W Project

Postby Ron Hanley » Wed Mar 09, 2011 10:48 pm

Nice bike Peter. Always thought I would like to try a GP bike, the real deal. Just noticing the distance between the seat and the foot pegs. For some of us older more rounder riders, this could cause a little strain on the knees.
Ron Hanley
Little Red 770
Waterloo, ON
User avatar
Ron Hanley
VRRA Member
 
Posts: 122
Joined: Mon Jan 14, 2008 12:04 am
Location: Elmira

Re: TZ250W Project

Postby Peter Balfour » Thu Mar 10, 2011 8:34 am

You're right...it is a bit of a tight fit, I can barely get my legs over the seat :shock: . Once on the bike though I did not find it all that bad since you are moving around on the little thing a lot. It is a blast to ride though and it does everything well. The only problem is it shows the real problem with crappy laps...the rider :D . Should be fun this year!

Peter
#2
'71 BSA B50 P1-500
‘84 Yamaha FJ600
User avatar
Peter Balfour
Tech Committee
 
Posts: 1848
Joined: Sat Aug 20, 2005 9:30 am
Location: Mitchell, Ontario

Re: TZ250W Project

Postby The Flying Fossil » Thu Mar 10, 2011 3:54 pm

Hey Ron, I'm one of those older, rounder riders (6'2", 210 lbs) and indeed it's a tight wind to fit - I've had to pull off twice in 20 years due to cramps - but the effort is worth it!

Peter - I look forward to seeing your face after your first ride - I hope your face doesn't fall in half from the size of the grin!

Les.
The Flying Fossil
User avatar
The Flying Fossil
VRRA Member
 
Posts: 477
Joined: Mon Feb 03, 2003 7:02 pm

Re: TZ250W Project

Postby cha0s#242 » Thu Mar 10, 2011 4:59 pm

Sweet ride ! What are you planning to do for a paintjob ?
Image François Cartier #242, professionnal wildcard.
User avatar
cha0s#242
VRRA Member
 
Posts: 936
Joined: Tue Mar 24, 2009 2:47 pm
Location: Mtl South Shore

Re: TZ250W Project

Postby mixstup » Thu Mar 10, 2011 6:26 pm

Always humbly willing to pilot interesting GP projects and lavishly appointed street/race bikes.Email me anytime!

mick
member#1400 race#75
Thanks to Denis and Byron at CMR Racing Products , Phil Havens and all at Thornbury Home Hardware and Jim Keast
mixstup
 
Posts: 318
Joined: Fri Jan 02, 2009 10:06 am
Location: Thornbury

Re: TZ250W Project

Postby Peter Balfour » Thu Mar 10, 2011 8:58 pm

I'm thinking of painting the bike to look like the original with the optional sticker package Yamaha had available in '89.

Image
#2
'71 BSA B50 P1-500
‘84 Yamaha FJ600
User avatar
Peter Balfour
Tech Committee
 
Posts: 1848
Joined: Sat Aug 20, 2005 9:30 am
Location: Mitchell, Ontario

Re: TZ250W Project

Postby thelittleguy » Thu Mar 10, 2011 9:00 pm

Hey Peter
Dont worry about the cramped style of a real race bike.After a few laps your nuts will figure out where to go , its the dismount and the first few steps afterwards that yer fellas get a little dangled. Thats why les , myself and other GP phobes sit down for a bit after a track session with the TZs , cus we lost the fellas and we just wait for them to come back
AWSOME
Steve
thelittleguy
VRRA Member
 
Posts: 1373
Joined: Fri Jan 31, 2003 9:30 am

Re: TZ250W Project

Postby Martin426 » Fri Mar 11, 2011 8:17 am

That thing is saweeet Peter! Quite inspiring...

Scott
1970 CR750 replica - P2H
1979 RCB1000 replica - P3H | Endurance
1988 RC31 - P4F3
Member #1431
Race #6
User avatar
Martin426
 
Posts: 151
Joined: Thu May 28, 2009 6:29 am
Location: Puslinch, ON

Re: TZ250W Project

Postby GaryMulcahey » Fri Mar 11, 2011 9:10 am

Nice TZ Peter. Are you coming out to race with the 250's in the RACE series or just sticking to the VRRA?
We could use more 250s on the grid. Hope to see you and yours out there.

G
User avatar
GaryMulcahey
VRRA Member
 
Posts: 148
Joined: Tue Aug 30, 2005 5:29 pm

Re: TZ250W Project

Postby johnG#248 » Fri Mar 11, 2011 1:33 pm

She's a beauty Peter, but remember don't spend too much $$ on the paint :mrgreen: Keep the cash for the rubber !
VRRA member
johnG#248
VRRA Member
 
Posts: 534
Joined: Mon Oct 17, 2005 2:46 pm
Location: Barrie, Ont.

Re: TZ250W Project

Postby Motoshire747 » Fri Mar 11, 2011 2:39 pm

I love it! What's your address again? :lol:
Steve #7forty7
User avatar
Motoshire747
VRRA Member
 
Posts: 1494
Joined: Wed Jul 26, 2006 4:23 pm
Location: Orangeville

Re: TZ250W Project

Postby Peter Balfour » Mon Mar 28, 2011 12:25 pm

I got the graphics in the mail last week and laid them out on the bike to see if they got the sizing right. Should look OK. Don't worry John I'm not doing anything like putting clear over the graphics, easier to repair that way :D .

Image

Peter
#2
'71 BSA B50 P1-500
‘84 Yamaha FJ600
User avatar
Peter Balfour
Tech Committee
 
Posts: 1848
Joined: Sat Aug 20, 2005 9:30 am
Location: Mitchell, Ontario

Next

Return to Projects

Who is online

Users browsing this forum: No registered users and 1 guest