Board index   FAQ   Search  
Register  Login
Board index VRRA Racing Forum Projects

Two two strokes

NEW! This section is where we can show off our new bike projects!

Moderator: Michael Vinten

Re: Two two strokes

Postby Bruce Mc » Sun Nov 12, 2017 7:53 am

Funny thing about the front fender. For some reason it didn't go with the chassis when it was sold. I have been dragging it around with all my worldly possesions for the last 30 years and no intensions to get back into biking. Also have a good friend I used to race F2 with that had a box full of TZ stuff he had been dragging around that he has donated to the project. I hope he takes my offer to use my Gixxer for the school this spring.
Bruce Mc
 
Posts: 90
Joined: Fri Oct 17, 2014 8:44 am
Location: Ottawa

Re: Two two strokes

Postby Bruce Mc » Tue Nov 28, 2017 11:40 am

Waiting for parts so I get to cleaning up components. Someone did a great job making these silencers which are obviously not stock.

Image
Bruce Mc
 
Posts: 90
Joined: Fri Oct 17, 2014 8:44 am
Location: Ottawa

Re: Two two strokes

Postby Bruce Mc » Thu May 03, 2018 7:21 am

Project is moving slowly but forward. Finished off the rear brake and added a lot of small bits which have been a pain to source. Things like axle spacers, chain pulls, caliper seal kits, damper bracket and others have all come from overseas. These were recommended on TZ350.com, anyone have experience with them before I go ahead with the rebuild. Not sure I like the hollow crank pins.
Image
Last edited by Bruce Mc on Fri Mar 19, 2021 6:03 am, edited 4 times in total.
Bruce Mc
 
Posts: 90
Joined: Fri Oct 17, 2014 8:44 am
Location: Ottawa

Re: Two two strokes

Postby Bruce Mc » Thu May 03, 2018 7:38 am

Could use some help with front axle spacers, if someone has some time when changing tires to measure these they would be easy to machine. Left and right are the same size.
Also I have an Aeroquip brake line that I would like to use which has a British pipe thread (1/8 conical) which would need an adapter to thread into the Yam caliper (10X1.0mm)
Bruce Mc
 
Posts: 90
Joined: Fri Oct 17, 2014 8:44 am
Location: Ottawa

Re: Two two strokes

Postby Justind97 » Thu May 03, 2018 7:59 am

Try Freco Fluid Power for the adapter. Near Hunt Club and Prince of Wales.

The random stuff they have there is awesome.
Justind97
 
Posts: 451
Joined: Sat Jan 25, 2014 11:17 pm

Re: Two two strokes

Postby bitzz » Thu May 03, 2018 10:46 am

There is nothing wrong with the ProX rods, don't use the bearings.
There is a Yamaha rod, 34X-11651-00, from an Exciter snowmobile, same dimensions.
Big end use Suzuki RM125 silvered:
Suzuki:09263-22060
Wiseco: B1047
ProX: 22-22816F

I prefer the hollow pin, IF the fit is still tight, like it still takes 5 tons to press out, and goes BANG when it releases in the press.
The solid serrated pin came with the RDs that had a great big alternator rotor hanging off one end of the crank.

I'll trade you solid pins for hollow ones.
VRRA Member
bitzz
VRRA Member
 
Posts: 542
Joined: Fri Jan 31, 2003 6:53 pm

Re: Two two strokes

Postby Bruce Mc » Sun Jan 27, 2019 1:05 pm

bitzz wrote:There is nothing wrong with the ProX rods, don't use the bearings.
There is a Yamaha rod, 34X-11651-00, from an Exciter snowmobile, same dimensions.
Big end use Suzuki RM125 silvered:
Suzuki:09263-22060
Wiseco: B1047
ProX: 22-22816F

I prefer the hollow pin, IF the fit is still tight, like it still takes 5 tons to press out, and goes BANG when it releases in the press.
The solid serrated pin came with the RDs that had a great big alternator rotor hanging off one end of the crank.

I'll trade you solid pins for hollow ones.

Can you explain your preference for the hollow pins?
Bruce Mc
 
Posts: 90
Joined: Fri Oct 17, 2014 8:44 am
Location: Ottawa

Re: Two two strokes

Postby bitzz » Sun Jan 27, 2019 4:56 pm

They're considerably lighter
VRRA Member
bitzz
VRRA Member
 
Posts: 542
Joined: Fri Jan 31, 2003 6:53 pm

Re: Two two strokes

Postby Bruce Mc » Fri Mar 19, 2021 7:54 am

Image
This has been a long haul but getting closer all the time. Hope to see the track this year.
Bruce Mc
 
Posts: 90
Joined: Fri Oct 17, 2014 8:44 am
Location: Ottawa

Re: Two two strokes

Postby bwaller » Sun Mar 21, 2021 6:06 pm

Hope to see you racing it.
Which way'd they go?
bwaller
VRRA Member
 
Posts: 608
Joined: Sat Jun 09, 2007 2:30 pm
Location: Franklin Centre, Que.

Re: Two two strokes

Postby Bruce Mc » Tue Mar 30, 2021 12:46 pm

Image
Bruce Mc
 
Posts: 90
Joined: Fri Oct 17, 2014 8:44 am
Location: Ottawa

Re: Two two strokes

Postby bwaller » Sun Apr 11, 2021 6:17 pm

What a great bike.
Which way'd they go?
bwaller
VRRA Member
 
Posts: 608
Joined: Sat Jun 09, 2007 2:30 pm
Location: Franklin Centre, Que.

Re: Two two strokes

Postby Bert Lilley » Mon May 29, 2023 5:18 pm

Woooooow wow suck,Blow Bang
Bert Lilley
VRRA Member
 
Posts: 37
Joined: Thu Mar 20, 2003 9:24 am
Location: Sundridge, Ontario

Previous

Return to Projects

Who is online

Users browsing this forum: No registered users and 3 guests