Board index   FAQ   Search  
Register  Login
Board index VRRA Racing Forum Projects

P3 LWT Project(s)

NEW! This section is where we can show off our new bike projects!

Moderator: Michael Vinten

P3 LWT Project(s)

Postby Rick Yates » Thu Nov 24, 2011 3:09 pm

I picked this bike up from Mr. Daigle a couple of years ago, and have decided to stop procrastinating about it. It was showing 8,000 km's on the odometer. Hadn't run since 1988. Cold compression test was 120. We assembled and cleaned the carbs and it started right up. Brian supplied one of his famous Gpz Dash boards and a race wiring harness. New steering head bearings and fork seals have been done.We mocked up an exhaust and have sent the wheels and bodywork out for paint..
I'll post pics of the progress and work involved to get a barn bike on the track.

Image


I thought that while we were at it, why not fix the 1981 that was damaged in 09....so we dragged it out of storage and will document the resurrection.. :D


Image
User avatar
Rick Yates
VRRA Member
 
Posts: 1579
Joined: Thu Jan 30, 2003 7:42 pm
Location: Ayr, Ontario

Re: P3 LWT Project(s)

Postby brian-d #43 » Fri Nov 25, 2011 11:31 am

UMMMM, Rick? The bike in the picture is NOT the bike I sold you. I NEVER would have sold an original, limited-edition gold model GPz.

But anyways, it's good to see you've FINALLY got off your duff and are doing something!!! :lol:

Brian D. #43
If you're not having fun, why bother!!
User avatar
brian-d #43
VRRA Member
 
Posts: 928
Joined: Sun Feb 12, 2006 8:26 pm
Location: Montreal

Re: P3 LWT Project(s)

Postby Rick Yates » Fri Nov 25, 2011 12:48 pm

Well, the gold tank is from a bike I got from Jim Kots....the red tank is being painted the correct colour.. :D :D




Rick
User avatar
Rick Yates
VRRA Member
 
Posts: 1579
Joined: Thu Jan 30, 2003 7:42 pm
Location: Ayr, Ontario

Re: P3 LWT Project(s)

Postby brian-d #43 » Fri Nov 25, 2011 3:18 pm

For your information, the CORRECT color is RED, NOT some derivative of 'PIPI GREEN'!!! :twisted:

But the BEST color will always be GOLD!!! :D

Brian D. #43
If you're not having fun, why bother!!
User avatar
brian-d #43
VRRA Member
 
Posts: 928
Joined: Sun Feb 12, 2006 8:26 pm
Location: Montreal

Re: P3 LWT Project(s)

Postby Rick Yates » Thu Jan 26, 2012 6:41 pm

1981 Gpz Resurrection
Engine is out and frame is stripped..

Image


Donor frame...

Image

Frame braced and painted

Image


Back on her feet..

Image


More progress. I changed the transmission out in the engine. Wired the bike for racing and cut the muffler in half.
Image

Image

Nearly there...

Image
User avatar
Rick Yates
VRRA Member
 
Posts: 1579
Joined: Thu Jan 30, 2003 7:42 pm
Location: Ayr, Ontario

Re: P3 LWT Project(s)

Postby Bob Smith » Fri Jan 27, 2012 7:54 am

Gorgeous work as always Rick, progress was evident from one picture to the next. Looking forward to seeing it at the track.

Bob
Bob
When in doubt, give it gas. It may not help the situation, but it will end the suspense!
User avatar
Bob Smith
VRRA Member
 
Posts: 514
Joined: Sun Oct 05, 2003 8:38 pm
Location: Scarborough

Re: P3 LWT Project(s)

Postby Rick Yates » Tue Jan 31, 2012 5:49 pm

Progress on the 1982

The streetbike header stuck out and needed to be tucked in for safety and to stay inside the rails for the bellypan...

Mock-up:
Image

Finished:

Image
User avatar
Rick Yates
VRRA Member
 
Posts: 1579
Joined: Thu Jan 30, 2003 7:42 pm
Location: Ayr, Ontario

Re: P3 LWT Project(s)

Postby cha0s#242 » Wed Feb 01, 2012 2:06 pm

Richard Yates wrote:Brian supplied one of his famous Gpz Dash boards and a race wiring harness.


I take it Brian had previously bought that race winning harness from Lee Newbury or Dave Côté ? :lol:

Nice project, Rick !
Image François Cartier #242, professionnal wildcard.
User avatar
cha0s#242
VRRA Member
 
Posts: 936
Joined: Tue Mar 24, 2009 2:47 pm
Location: Mtl South Shore

Re: P3 LWT Project(s)

Postby brian-d #43 » Wed Feb 01, 2012 3:42 pm

Humph!

Denigration from a guy who can't race anymore 'cause without Virginie he can't even plug his tire warmers in!!! :lol:

Brian D. #43
EXPERT wiring harness manufacturer!!
If you're not having fun, why bother!!
User avatar
brian-d #43
VRRA Member
 
Posts: 928
Joined: Sun Feb 12, 2006 8:26 pm
Location: Montreal

Re: P3 LWT Project(s)

Postby mike burke » Thu Feb 02, 2012 8:03 am

Nice Rick. Let me know when you want me to give it a test run.

mike
Mike

Grampa #227

Enjoy life!
User avatar
mike burke
VRRA Member
 
Posts: 1121
Joined: Mon Mar 10, 2003 7:40 pm
Location: On the road again ....


Return to Projects

Who is online

Users browsing this forum: No registered users and 2 guests

cron