Page 2 of 4
Re: P3 GS750 Project
Posted:
Fri Apr 03, 2015 9:41 pm
by mccoy
Rear hoop welded on.
Re: P3 GS750 Project
Posted:
Sat Apr 25, 2015 5:38 pm
by mccoy
Frame blasted and primed.Starting to do a mock up.
Re: P3 GS750 Project
Posted:
Sat Apr 25, 2015 5:39 pm
by mccoy
Still waiting on shocks. Using an OEM unit for now.
Re: P3 GS750 Project
Posted:
Sat Apr 25, 2015 6:26 pm
by turtlehub
there is a pair of works performance shocks for sale in "parts & accessories". $60. they may suite your bike...
project is looking good!
Re: P3 GS750 Project
Posted:
Sat Apr 25, 2015 10:08 pm
by mccoy
Those are eye to eye, the GS uses eye to clevis. I have a pair of shocks en route. Thanks though.
Re: P3 GS750 Project
Posted:
Sat Apr 25, 2015 10:13 pm
by mccoy
GS 850 Front end on using Allballz conversion bearings. The tach is original with a custom aluminum housing and mount that I made myself. I have to re-adjust the angle.
Re: P3 GS750 Project
Posted:
Sat Apr 25, 2015 10:15 pm
by mccoy
I started to make some rear sets. This is what I have so for.
Re: P3 GS750 Project
Posted:
Sat Apr 25, 2015 10:33 pm
by Peter Balfour
Looking awesome, nice work!
Re: P3 GS750 Project
Posted:
Sun May 03, 2015 8:58 pm
by mccoy
Finally got the bike onto the lift.
Re: P3 GS750 Project
Posted:
Wed May 13, 2015 7:42 pm
by mccoy
Empty engine case in place for exhaust support bracket location.
Re: P3 GS750 Project
Posted:
Wed May 13, 2015 8:15 pm
by mccoy
Added the necessary brackets and tabs before paint.
Re: P3 GS750 Project
Posted:
Sun May 31, 2015 5:55 pm
by mccoy
Battery box mounts welded in and box mounted.
Re: P3 GS750 Project
Posted:
Sun May 31, 2015 6:16 pm
by mccoy
I decided that i wanted rearsets like these Tarozzi's but needed to spend the funds on more important items. So, i figured i would attempt to make them.
Re: P3 GS750 Project
Posted:
Sun May 31, 2015 6:23 pm
by mccoy
i'm making two sets. They will be adjustable. Here is a shot while still in the Mill. There are 48 drilled and tapped M4 holes.
Re: P3 GS750 Project
Posted:
Sun May 31, 2015 6:26 pm
by mccoy
Trimming.