Page 5 of 6
Re: MidProd 500 Single
Posted:
Mon Jan 07, 2013 11:46 pm
by BrianL
Out with the old carb and in with the new......Oh ya!!!!!!!!!!!!
Shocks are looking good too....Just need paint.
Re: MidProd 500 Single
Posted:
Tue Jan 08, 2013 7:50 am
by TimV
Looking good, Brian!
How does that damper bracket fasten at the gas tank bolt? I had trouble with Linc's there...the bracket would just swivel when I stiffened up the damper. I wound up drilling and tapping a small hole on each side of the bolt on the frame bracket, drill the damper bracket to match, and install 2 small & short flat head machine screws. I tried a rivet, but it didn't last. All of this is behind the part of the tank where it's bolted to the frame. Linc would have to get you a photo of that if my description is not clear enough.
Keep up the good work!
TimV
Re: MidProd 500 Single
Posted:
Tue Jan 08, 2013 9:41 am
by BrianL
Re: MidProd 500 Single
Posted:
Tue Jan 08, 2013 3:50 pm
by TimV
BrianL wrote:.... So far, so good! It's so nice to have motorcycle related projects during the winter. Helps with the PMS...( Parked Motorcycle Syndrome ). Cheers, Brian.
I know what you mean. I have 2 street bikes and 2 race bikes to do this winter, plus a couple P1-350 engines to get into soon. One of the street bikes, an RZ350, was bought in boxes in 1999. I hope to ride it for the first time this spring.
Re: MidProd 500 Single
Posted:
Tue Jan 08, 2013 11:58 pm
by BrianL
Got my seat back from the shoemaker today....Looks nice. Playing with using the original TT number plates. Sent an email to Tech, so we'll see if they OK it. Would be cool if they let me cause then the rear could stay a little cleaner and my high pipe would not interfere.
Re: MidProd 500 Single
Posted:
Tue Jan 08, 2013 11:59 pm
by BrianL
My legs don't seem to interfere for timing and scoring...
Re: MidProd 500 Single
Posted:
Wed Jan 09, 2013 12:02 am
by BrianL
Nice thing about the stock seat is the fitment. Two bolts...
No messing around...Gotta love that...
Re: MidProd 500 Single
Posted:
Wed Jan 09, 2013 12:05 am
by BrianL
Trying to decide between these two oil coolers....Any thoughts my esteemed colleagues?????
Re: MidProd 500 Single
Posted:
Sat Jan 12, 2013 8:47 pm
by BrianL
Well, my first attempt at a belly pan...Turned out OK. Free or in the Garbage racing lives on!!! Friend gave me a sheet of alloy and I mocked something up out of cardboard and then made it from the alloy...I like it1!!
Re: MidProd 500 Single
Posted:
Sat Jan 12, 2013 8:51 pm
by BrianL
Had a hell of a time with the fly wheel with the cases that I got from a friend with the Carrillo rod!!! Threads were stripped so had to get creative. Nothing worked, so in the end it was heat and a whack!!! Off she came...Cheers.
Re: MidProd 500 Single
Posted:
Sat Jan 12, 2013 8:57 pm
by BrianL
Re: MidProd 500 Single
Posted:
Sun Jan 13, 2013 8:24 am
by BrianL
With so much mock upwork getting done on the frame, it's time to get dirty with these motors...
Re: MidProd 500 Single
Posted:
Sun Jan 13, 2013 8:29 am
by BrianL
Scored a self generating ignition with the balanced crank and Carrillo rod....And I'll be mounting the pan this week with some sort of quick release system for Tech....
Re: MidProd 500 Single
Posted:
Sun Jan 13, 2013 8:49 am
by Pearson
Brian
The belly pan turned out very nice. Q - are you running stock flywheel weight or making it lighter?
Your going to need a farmers licence soon if you get anymore donor bikes / motors.
Carl
Re: MidProd 500 Single
Posted:
Sun Jan 13, 2013 9:34 am
by BrianL
The one with the Carrillo rod has been shaved a fair amount....But I'm look hard at an aftermarket ignition with no fly wheel....Space I have, since I sold my 5 Suzuki GS bikes !!!! And my XT250 !!!