Guzzi was built and raced by Kim Andersen, after some noise issues at Mosport last year I bought the bike as I thought I would endurance race it.
Heads were done by Tim Spiegleberg when the big bore kit was installed.
The noise was bits of the starter housing caused by a broken bolt.
All new hardware installed on the flywheel and clutch.
New clutch cable and proper lever.
The bike was thoroughly gone over, rewired, new lightweight starter, new throttle cables, straight intake manifolds and new 41mm Dell’Orto carbs.
Calipers we’re rebuilt up front and new pads installed.
Bike was tested at a track day, where carbs were set up.
The bike comes with a few spares.
The current diameter exhaust is ok but the motor needs a larger diameter system to breathe better.
Located in Toronto.
$7500.
Paul
