Fresh EX500 Build!!!
Posted: Sat Feb 18, 2017 8:58 pm
Built this bike to race in the VRRA but with RACE and CSBK I don't have time or money.
Bike is a second gen so it has the 17" wheels and better CCT. It does have first gen body work so it's legal.
-Woodcraft clip-ons.
-Racetech springs and emulators assembled by Accelerated Technologies.
-Rear shock is currently a low km stock unit from a Ninja 300.
-EBC full floating rotor.
-EBC HH front pads.
-Galfer front and rear braided lines.
-Fog air box mod.
-Fog bones.
-Fog rearset plates.
-K&N air filter.
-Airtech lower fairing with oil containment.
-New S20 Evo's front and rear.
-Fresh 300V oil and factory filter.
-Fully safety wired.
All parts were purchased new and only have about 8 shake down laps on them.
Comes with a first gen parts bike.
Also comes with all new and in the packaging: cables, wheel bearings, steering head bearings, caliper rebuild kits, master cylinder rebuild kits, all swingarm and shock linkage bearings & bushings.
For everything listed above looking for $2,600
Have some other new parts not yet installed which could be worked into the deal:
-Elka rear shock.
-Trailtech Vapour digital dash.
-Rev limiter.
I'll try to get pics up tomorrow.
Bike is a second gen so it has the 17" wheels and better CCT. It does have first gen body work so it's legal.
-Woodcraft clip-ons.
-Racetech springs and emulators assembled by Accelerated Technologies.
-Rear shock is currently a low km stock unit from a Ninja 300.
-EBC full floating rotor.
-EBC HH front pads.
-Galfer front and rear braided lines.
-Fog air box mod.
-Fog bones.
-Fog rearset plates.
-K&N air filter.
-Airtech lower fairing with oil containment.
-New S20 Evo's front and rear.
-Fresh 300V oil and factory filter.
-Fully safety wired.
All parts were purchased new and only have about 8 shake down laps on them.
Comes with a first gen parts bike.
Also comes with all new and in the packaging: cables, wheel bearings, steering head bearings, caliper rebuild kits, master cylinder rebuild kits, all swingarm and shock linkage bearings & bushings.
For everything listed above looking for $2,600
Have some other new parts not yet installed which could be worked into the deal:
-Elka rear shock.
-Trailtech Vapour digital dash.
-Rev limiter.
I'll try to get pics up tomorrow.