Page 1 of 5

The tale of RS250RF #40...

PostPosted: Fri Oct 19, 2007 11:01 pm
by fredybender
Long story short:
Used to be in bikes in the 80's... My first ever bike was an RD400 1977...
My best date in those days, was on an RZ500...

So, bought a 1985 RS250RF (first year) serial# RS250RF-5140

This bike was originally driven by Paul McMillan, and Ralph Murphy in 85, until 1990: I have a few records, and tuning fiche from those days...

In 1990 it was bought by Chris Coyle, who won the canadian title in 1994 with this 9 year old bike...

I have all set-up sheets, and logs from 1990-1994...

In 1995, he moved, and theb ike got taken appart, never to be touched again, until I found it...(married life for him, etc...)

So, this is the tale of RS250RF #5140, being brought back to life, and expected to start being active again in 2008...

Pictures for your enjoyment...

Bought the bike and had a 16 hour drive... unloaded the stuff...
Image
Image
[img]http://i49.photobucket.com/albums/f274/fredybender/RS250R/IMG_3087.jpg[/I[IMG]http://i49.photobucket.com/albums/f274/fredybender/RS250R/IMG_3072.jpg[/img]
MG]
Image
Image

PostPosted: Fri Oct 19, 2007 11:04 pm
by fredybender
So got the engine done,

Image
Image


Tgis is the tank getting stripped : ready for prep & paint...

Image

PostPosted: Fri Oct 19, 2007 11:07 pm
by fredybender
Here is what I did for the rad :
Had it steamed, and then took about 5-6 hours, straightening the fins back... with a small flat head crewdriver, and a par of bent long nose...



Image

PostPosted: Fri Oct 19, 2007 11:10 pm
by fredybender
Then I had the Original ATAC mechanism, all cleaned out, and every thing seems like its there... I am only missing on side of the ATAC ''U'' shaped bracket, and they could bue fully operationnal... But Meanwhile I have the non-ATAC spigots , and block off plates, to get the bike going...

Image

PostPosted: Fri Oct 19, 2007 11:16 pm
by fredybender
As for the wheels, I have both the original D.I.D set ( COMSTAR Wheels) and some original 18'' slicks, and some 17'' Magnesium Marvic's...

Got the Marvic's magnafluxed, blasted, powder coated, and magnafluxed again... They got new bearings & seals too...

As for the the Comstar's, they still hold their original paint...
Image
Image

PostPosted: Fri Oct 19, 2007 11:19 pm
by fredybender
Had some of the best expansion chambers re-done, welded, and powder coated;
The powder coating is actually a refractory paint ( Black wrinkle satin finish...)


Image
Image

PostPosted: Fri Oct 19, 2007 11:22 pm
by fredybender
After this,
polished my frame, triples, and other parts...
Image
Image
Image
Image

PostPosted: Fri Oct 19, 2007 11:26 pm
by fredybender
After having all new bearings, seals and others, at the swing arm, & steering stem, now its time for the rear suspension, with all new stuff too...
Image
Image
Image
Image
Image

PostPosted: Fri Oct 19, 2007 11:31 pm
by fredybender
Hopefully, this is the fianl result that wiil come out of this build...

I am going to make a replica of Freddie's bike...

(Funny my name is Freddie too...)

1985 250GP world championship RS250RF, from Freddie Spencer...
Image
Image

PostPosted: Sat Oct 20, 2007 6:14 am
by Mikey
Lookin Good. Thanks for sharing. Can't wait to see it "in person".

PostPosted: Sat Oct 20, 2007 12:59 pm
by paul whittaker
can one of our hexperts tell us about the long and short main jets in the pic, are they interchanged and why ? Paul.

PostPosted: Sun Oct 21, 2007 10:52 pm
by fredybender
Image
Image

PostPosted: Fri Oct 26, 2007 11:53 am
by jonnycowboy
beauty of a rebuild, can't wait to see the rest!!

PostPosted: Fri Oct 26, 2007 12:59 pm
by fredybender
jonnycowboy wrote:beauty of a rebuild, can't wait to see the rest!!


Thanks!
Rolling chassis mock-up...

Image
Image
Image
Image
Image

PostPosted: Sat Oct 27, 2007 8:49 pm
by fredybender
Some front rotor progress from saturday...





Before:

Image







After:

Image

Image

Image