BMW eye candy and body parts source

[Stephen Szikora]

http://www.boxercafe.com/Sidecar.htm

[limy_1]

They are the ones that finally located Will Kenny's rig after he was killed testing on the street in Chicago.
It had been out of site for about 5 years.
The debut it at Mid-Ohio last year and took it to Miller then finally Barber last year.
Eye candy is right and it doesn't run to bad with an inexperienced driver and a rookie passenger.
I even was given the pleasure of giving a couple of taxi rides with me at the controls rather than the chair.

[Gary Green]

Good to see this rig back out on the track. It is looking great and sounds like it is running well.

Anyone have any idea what happened to Willie's F2 Rig?

[paul whittaker]

First time I have looked at this post; the dustbin looks just a little too much like mine, which Ron Brooks makes now. The main body came from Clark Wallace's rig but I added about 3" to the height, the deck was added with plywood and an inflated car tube, I left some of the huge holes in the front for air scoops. Paul.

[paul whittaker]

dustbin fairing 002.jpg

dustbin fairing 001.jpg

This is the fairing made by Ron Brooks for me for the last 6-8 years, from my original. Paul.

[tintop]

When I 1st looked at that photo Paul, those where my exact same thoughts. It sure looks like yours.

[thelittleguy]

I used to make the same fairings a few yrs back. The mould is at Jean Guys at maxville .Im sure if someone wanted it he would sell it.I made a couple for Bob Coy and I know there was at least two other vrra rigs with my fairings on, this was going back about 12yrs or so ago, but I did see the mould last weekend.
Steve

[paul whittaker]

The couple I remember from Bob's were fatter at the bottom, a pregnant look to them, and I do not remember a deck in them? Paul.

[csrrace]

the mould i have has a deck, if someone wants it, 200 bucks. pick up only. i olso have some 12 " wheels, mags with hubs cast into them , car tires on them. they are off early sidecar outfit, 300 bucks. JG