Been out of the loop so I don't know who the volunteer coordinator is this year. Available for the 3 days and usually help out at pit in.

RACE PREPPED, NEEDS SOME COSMETIC REHAB DUE TO OFF ROAD EXCURSION. CALL FOR DETAILS AND SPARES LIST BRUCE 613-880-9772

This has been a long haul but getting closer all the time. Hope to see the track this year.

There is nothing wrong with the ProX rods, don't use the bearings. There is a Yamaha rod, 34X-11651-00, from an Exciter snowmobile, same dimensions. Big end use Suzuki RM125 silvered: Suzuki:09263-22060 Wiseco: B1047 ProX: 22-22816F I prefer the hollow pin, IF the fit is still tight, like it still ...

Thanks for the interest, but I am going to hang on for now........err possibly hang off.

Ready to race, has a few good extras and spares there was 29k on the speedo when I purchased it 520 chain & spkts front end overhauled shock (stock) by Accelerated Technologies after market steering damper all the street trim spare motor and cyl hd 1991 two rear wheels spare tank (nice black and...

Could use some help with front axle spacers, if someone has some time when changing tires to measure these they would be easy to machine. Left and right are the same size. Also I have an Aeroquip brake line that I would like to use which has a British pipe thread (1/8 conical) which would need an ad...

Project is moving slowly but forward. Finished off the rear brake and added a lot of small bits which have been a pain to source. Things like axle spacers, chain pulls, caliper seal kits, damper bracket and others have all come from overseas. These were recommended on TZ350.com, anyone have experien...

Waiting for parts so I get to cleaning up components. Someone did a great job making these silencers which are obviously not stock.

Funny thing about the front fender. For some reason it didn't go with the chassis when it was sold. I have been dragging it around with all my worldly possesions for the last 30 years and no intensions to get back into biking. Also have a good friend I used to race F2 with that had a box full of TZ ...

BTW picking up parts for the 250 along the way and may run it with an RD motor unless a cheap original comes along.

The #441 is a 1978 TZ250E, the bike I raced and sold in 1983. I came across it a couple years ago and purchased it along with a 1977 350D. There was not much of the 250 there, frame body parts, shock and wheels. The 350 is mostly there although I was lucky enough to find a missing swing arm at a rea...

No early registration rate?

Exiting 6 (1983) Will be using a few parts from this old friend on this 350 build